Déterminez la flèche maximale et le moment radial maximal d'une plaque circulaire avec un appui simple, une température uniforme et une température différentielle.
Déterminez le déplacement maximal, les contraintes dans le plan et les rapports de contraintes d'une plaque de verre à double vitrage avec une feuille entre les deux vitrages soumise à une pression uniforme.
Déterminez la flèche et la contrainte maximales dans la direction z de la plaque mixte, composée de deux couches de verre et d'une couche de feuille entre, soumise à une pression uniforme.
Une plaque mince est fixée sur un côté et chargée à l'aide d'un moment de torsion réparti sur l'autre côté. Tout d'abord, la plaque est modélisée sous forme de plaque plane. De plus, la plaque est modélisée comme le quart de la surface cylindrique. La largeur du modèle plan est égale à la longueur du quart de la circonférence du modèle courbe. Le modèle courbé présente donc une constante de torsion presque égale à celle du modèle plan.
Un câble en acier ou une membrane avec des axes aux deux extrémités est chargé par une charge distribuée. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Une console est chargée par une force concentrée à son extrémité libre. Determine the maximum deflection of the console using large deformation analysis.
A vertical cantilever with a square cross-section is loaded at the top by tensile pressure. Le porte-à-faux est en matériau isotrope. Calculate the deflection.
Un porte-à-faux est chargé par une force transversale et un effort normal à l'extrémité droite et est entièrement encastré à l'extrémité gauche. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Déterminez le moment fléchissant qui, agissant à l'extrémité libre du porte-à-faux, fléchit la barre en forme circulaire. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
Une barre légèrement inclinée est chargée par une force concentrée, maintenue par un ressort à une extrémité et supportée à l'autre extrémité. Assuming large deformations and neglecting the member's self-weight, determine its maximum upward deflection.
A structure is made of two trusses, which are embedded into the hinge supports. The structure is loaded by concentrated force. le poids propre est négligé. Determine the relationship between the loading force and the deflection, considering large deformations.
A structure is made of two trusses of unequal length, which are embedded into the hinge supports. The structure is loaded by concentrated force. le poids propre est négligé. Determine the relationship between the loading force and the deflection, considering large deformations.
A structure made of I-profile trusses is supported on both ends by spring sliding supports and loaded by transversal forces. Le poids propre est négligé dans cet exemple. Determine the deflection of the structure, the bending moment, the normal force in the given test points, and the horizontal deflection of the spring supports.
Une poutre articulée aux deux extrémités est chargée avec une force concentrée au centre. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Un porte-à-faux est chargé par un moment à son extrémité libre. Using the geometrically linear analysis and large deformation analysis, and neglecting the beam's self-weight, determine the maximum deflections at the free end. The verification example is based on the example introduced by Gensichen and Lumpe.
Une plaque de Kirchhoff rectangulaire avec un simple appui est soumise à une pression latérale uniforme et est étirée par une charge répartie. The maximum out-of-plane deflection is determined by assuming small deformations.
Un câble très rigide est suspendu entre deux appuis. Determine the equilibrium shape of the cable (the catenary), consider the gravitational acceleration, and neglect the stiffness of the cable. Verify the position of the cable at the given test points.
Une plaque orthotrope rectangulaire mince est simplement supportée et chargée par une pression uniformément répartie. The directions of axes x and y coincide with the principal directions. While neglecting self-weight, determine the maximum deflection of the plate.
Un treillis plan composé de quatre barres inclinées et d'une barre verticale est chargé au niveau du nœud supérieur à l'aide d'une force verticale et d'une force hors du plan. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Un système à double masse est composé de deux puits et de deux masses représentées par les moments d’inertie correspondants, concentrés dans une distance donnée sous forme de masses nodales. The left shaft is fixed, and the right mass is free. Neglecting the self‑weight of the shafts, determine the torsional natural frequencies of the system.
Le pendule mathématique est composé d'une corde de poids zéro et d'un point de masse à son extrémité. The pendulum is initially deflected. Determine the angle of the rope at the given test time.
Un système à un degré de liberté avec un jeu et deux ressorts est initialement fléchie. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Un câble est chargé à l'aide d'une charge uniforme. This causes the deformed shape in the form of the circular segment. Determine the equilibrium force of the cable to obtain the given sag of the cable. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Une membrane de diaphragme sphérique est remplie de gaz avec une pression atmosphérique et un volume défini (ces valeurs sont utilisées uniquement pour la définition du modèle EF). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Une membrane cylindrique est tendue à l'aide d'une précontrainte isotrope. Find the final minimal shape of the membrane - catenoid. Determine the maximum radial deflection of the membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Une membrane est tendue au moyen d'une précontrainte isotrope entre deux rayons de deux cylindres concentriques ne se trouvant pas dans un plan parallèle à l'axe vertical. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.